These Table Top Units are very simple when it comes to efficiency and ease of use.

Totally closed systems allow one to use butane as a liquid solvent in a safe manner.   Butane is preferred for organic extractions due to its ability to extract non-toxically and extremely delicately.  

In addition, you no longer need to evaporate your butane away. You can now recover the solvent for reuse.

In addition, you can add solvents to the butane for extracting chemicals other than what butane is capable of. Using polarity matching and chemical saturation you can add exactly the solvent you need in exactly the amount you need to use to ensure you get as much of the chemical you want out of the plant material.  You can even do it twice if you want.

Originally developed to test extraction solvent and herbal extract combinations prior to investing in the expense of running them through a larger extraction process. We soon discovered the extreme efficiency in time, labor and money when using these small extractors. We even built a small recovery tank to recover and reuse the solvent used. Allowing even more money to be saved.

You do not need high volumes of solvents to extract when using butane as the carrier solvent. And when used as the primary solvent, the extraction process really works well due to the fact that you are sending almost 5 volumes of butane through the plant material.  There is almost a 5:1 ratio in the column capacity and the solvent holding tank capacity.

We consider these smaller table top extractors small enough to move around in one piece and set on a table top when in use. 

Other than a few internal differences, they are near exact replicas of our larger commercial Tamisium Butane Extractors (Currently available for Exclusive Licensing Production Rights - EMAIL OR CALL Ken at 808-870-1868 for details).    

The time to set up these smaller extractors and recover the lower volume of solvents used makes using this table top tamisium butane oil extractors a breeze.  The smaller size means you do not have to break them down to facilitate recovery of the solvent. Just hook up the recovery tank and follow the instructions. After a short wait, you should have all the solvent back for use again.

*Solvents other than butane may require a slightly longer recover time.

With a Tamisium Butane Extractor the need for expensive valves and high pressure lines and pumps are virtually eliminated during the extraction process. The cost and process of assembly is greatly reduced due to the fact that this is a Totally Closed, low temperature, low pressure, self contained system and process.

You are not just buying a extractor. You are buying a proven process and a method of extraction as well as a low cost method of recovering the solvent so you can spend your money on a system that saves you money in the long run.  *RECOVER, RECYCLE, REUSE.

Optional Accessory Solvent Condenser Tank for recovering the solvent for reuse. All lines, connections, quick disconnects and seals are included for recovery.

Teflon Sealed Ball Valves, High Pressure Caustic Chemical Recovery Line and Buna Quick Disconnects with removable Seals not shown on either drawing.

Please remember that most solvents are flammable. When opening and closing any of the extractors, please do so in a well ventilated, spark free environment. The smaller units can be taken outside. Know the properties of the solvents being used for any process of any extraction with any apparatus. Before disconnecting quick disconnects, make sure they BALL VALVES ARE CLOSED!. Double and triple check !! and again, only disconnect in a well ventilated area free from pilot lights and sparks or any other ignition sources.

Tamisium Butane Extractors Hawaii